Arduino Hilfe Referenzen

worklabs

Submitted by servus on Tue, 04/04/2006 - 13:38

Literatur zu Pysical Computing generell:

Physical Computing by Tom Igoe, Dan O'Sullivan
Tom Igoes physical computing site http://www.tigoe.net/pcomp/index.shtml
Getting started in electronics Forrest M. Mims III

Arduino Booklet: http://www.arduino.cc/en/Booklet/HomePage

Einkaufsliste Experimentier-Set für die ersten Arduino Versuche.

Arduino Board - bestellen unter < a href="http://www.arduino.cc/">http://www.arduino.cc/

Arduino Shema

Starting clockwise from the top center:

Analog Reference pin (orange)

Digital Ground (light green)

Digital Pins 2-13 (green)

Digital Pins 0-1/Serial In/Out - TX/RX (dark green) - These pins cannot be used for digital i/o (digitalRead and digitalWrite) if you are also using serial communication (e.g. Serial.begin).

Reset Button - S1 (dark blue)

In-circuit Serial Programmer (blue-green)

Analog In Pins 0-5 (light blue)

Power and Ground Pins (power: orange, grounds: light orange)

External Power Supply In (9-12VDC) - X1 (pink)

Toggles External Power and USB Power (place jumper on two pins closest to desired supply) - SV1 (purple)

USB (used for uploading sketches to the board and for serial communication between the board and the computer; can be used to power the board) (yellow)

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Bei Conrad

DIL STECKPLATINE

VERDRAHTUNGS-SET

USB KABEL 1,8 M GRAU

DIGI STANDARD SERVO TS-301 MG BB FUT

DRUCKSENSOR FSR-151NS (CP15)

FOTOWIDERSTAND A 9060 = A 9013

POTENTIOMETER LIN 10K

Kohleschichtwiderstand

"Piezo EPZ-35MS29 "

LOETSTATION WHS 40